Dear Goddy,
I was getting all my systems parts information and by mistake my profile got set before I entered the details.
I cannot find where I can edit my profile.
If you could please tell me how to edit my profile to put in my parts information in, I would be grateful to you.
My apologies for messing this up.
Kind regards,
Gerald Fleming
Hi. I`m the founder of the ChemasOverclockingTeam team (https://hwbot.org/team/chemasoverclockingteam), now team has no captains assigned, so I`d like to regain captain privileges. Recently I moved to another team, but in the end I decided to return. Already several times wrote to the e-mail Christian and Michael but didn`t receive a response. Thanks.
[img]https://i.imgur.com/nwA631G.png[/img]
Could you add the new Kirin, Snapdragon and Exynos SoC iterations to the list of available processors in the submission section? I assume there are some who would be interested to upload his newer devices' scores onto the leaderboard.
Please.
dit :
I9 9900KS is not a valid selection in the processor section
I joined a few days ago and was receiving points for submissions however in the past 5 days my total GTPP and HTPP points do not show or update on my profile page as well as cups and medals, can this be fixed?
I fear this page is partly broken since the classic update.
HWBot is making a transition to a new owner and the code will be revised by a new programmer. meaning this will take a long time before it will get fixed as we need to addres issues with a higher priority
About Cheapaz Chips Round 1 APU AMD 3000G
FM / UL verification link is required ← How can I set it up? The link between 3DMark and HWBOT has already been established, but there is no submission item to HWBOT from the result screen
Hello, i'm kinda new here, been hobbying pc's and hardware since 82 last century :)... so i made a profile, and submitted some scores, also fro xtu intel. Other submitted benches went ok, the xtu, was a bit figuring it out, and imo it worked, i submitted actual benches done on my pc, yesterday or the day before. Now when logging in and checking my profile, on top it says 3 submissions reported, so appearantly i must have done something wrong, also is it not possible to set my xtu profile 'public' ... at this moment when i go and check my profiles from xtu, they are gone, at the link on top where it says 'reported (3)' there is a sheet, where appearantly i must select a 'row' but it is complete blank, and cannot select anything, also an error message is posted in the sheet. In the comments is said that there are suggestions to alter my settings, so i loaded the profile in xtu, but it where the same settings... And my profile is unaible to make public for 'use of testing material and and some more things i should be using to do those benches' ... ehm shame i could not respond immediately to whoever decided that some settings could not even be made with my setup ... this is actually kinda weird, because the benches are just done on my pc, without help of any aftermarket super hardware testing rig ... but as said i am new here on site, so i probably must have done something wrong ... day 3 on the site, and i must say i am amazed that there is actually response to my scores, harder even, they get reported, or flagged automatically ... to be honest i have not gone through the hassle of reading every rule, because there are a lot of them, as i went to look at them a bit more euh focused. My personal goal is only to compare what i make with the settings of the hardware, and compare it with scores of other enthousiasts as to say... Can someone pls point me in a direction as maybe who to contact about the reported submissions. Because this community is for a third time visitor quite huge with a wide range of interest. So i understand there must be rules, not even arguing about that ... but being told i use special hardware and/or getting reported as such... So can someone pls enlighten me a little bit, i have no intentions what so ever to alter tests in my advantage being it with modded hardware or dodgy software, for the reason that i absolutely see no point in fooling myself. And for openers it would be nice if someone could just tell me what went wrong to begin with ;) ... Thanks in advance for taking your time reading this to begin with ... ;) peace out
Welcome, any questions you want to ask about rules feel free to make a thread with what you'd like to know. Not so bad once you get the hang of it. Don't take offense to reported submissions we all get them.
Edit: you will need screen shot with info in picture I posted red boxes mandatory.
If you have any speciific question you can contact me, Bilko or Georgestorm.
Anyway quick update on the site for you: subbing for other benchmarks via the XTU profile will be disabled in the future: it gives not accurate info and user tend to forget HWBot requires a verification screenshot in 99% of the cases ( like Splave showed you )
Before you go into benching or comparing scores with other users always check out the rules at the frontpage. Click on Benchmarks, choose CPU, GPU or memory benchmarks, select the rules of the benchmark you want to run...
Hey hello, thanks for the replies, ;) was not offended, here to learn, and probably maybe even an automated reaction on one of the settings, so no offence taken at all, if my rig gets seen as 'engineering hardware' how can i even be offended ;) ... thanks
XTU competitive usage at HWBOT has been stopped a while ago due to the fact it is far from stable, newer versions gave way higher output messing up the rankings and last but not least it still can be seriously bugged in output (intentionally or not).
Lately we here that people are running into hardware detection problems (stating they have ES hardware), the output datafile is sometimes no longer compatible with HWBot, ...
HWBot has a new owner and once the paperwork is completed we will discus if this bench still has a future here.
its just a bugged score, one of the reasons we don't use it anymore, these scores are everywhere , totally out of whack. Alsothey released a newer version which boosted scores over 20% , totally shredding up the existing ranking... no no no
Ow ... the plot thickens ;) ... last question, since i now understand why the reporting was done, next to reported there is (4) do i need to do anything about this 4 submissions ?? Or is it just an 'reported' counter ?
Guess this gets more interesting every day .... when the benchmarks get programmed to outrun tests on their predecessors ... must be getting complicated then, so you convinced me leeghoofd, its not empty at all :D thanks for giving some text about the whats and whatnots ;)
Can you please fix the error on the "Reported" page. Seems to have been there for a while.
https://community.hwbot.org/topic/194025-reported-tool-not-working/
Hello, I have accidentally submitted a score of 3d mark 11 entry level 2 times, 1st i typed score 15.923 as meaning fifteen thousand, but see afterwards is taken for 15,923 (bit less than 16 (not thousand))... so i submitted the score 15923 a second time, only then found out the original was able to be edited ... Idk if it is needed, but i could not personally remove one ... And please, where again is the desktop background picture for download, for i taken a picture from old bench, and moved all cpu-z and -g over the old ones (that where screenshot) ... thanks in advance and appologies for the inconvenience ... grtzzzz ps leeghoofd ... you are legend :o
Hello. I have an issue - every time I try to search for a CPU or find it through Hardware Library, there is an error message 504 Gateway Time-out. Tried from different ISPs and browsers but with no success. This is happening for about a week now. Could you please tell me is the problem on my side or not? Thank you.
Dear Goddy, I was getting all my systems parts information and by mistake my profile got set before I entered the details. I cannot find where I can edit my profile. If you could please tell me how to edit my profile to put in my parts information in, I would be grateful to you. My apologies for messing this up. Kind regards, Gerald Fleming
There is a small arrow next to your nickname on top. Click on this and you see options including profile.
Hello, I want to ask why I can not accept the challenges?
Hi, when will be RTX mobile Cards online?
I'll add them this evening.
Added
I can not log in to the forum Help me
Hi. I`m the founder of the ChemasOverclockingTeam team (https://hwbot.org/team/chemasoverclockingteam), now team has no captains assigned, so I`d like to regain captain privileges. Recently I moved to another team, but in the end I decided to return. Already several times wrote to the e-mail Christian and Michael but didn`t receive a response. Thanks. [img]https://i.imgur.com/nwA631G.png[/img]
reported to the programmers Mishanya1344
Thanks
dit :
Could you add the new Kirin, Snapdragon and Exynos SoC iterations to the list of available processors in the submission section? I assume there are some who would be interested to upload his newer devices' scores onto the leaderboard. Please.
dit :
I9 9900KS is not a valid selection in the processor section
problem with GTx8 results: https://ibb.co/qFrvPDd
seems to be a bug with DDR3 and this particular memory
I joined a few days ago and was receiving points for submissions however in the past 5 days my total GTPP and HTPP points do not show or update on my profile page as well as cups and medals, can this be fixed?
I fear this page is partly broken since the classic update.
HWBot is making a transition to a new owner and the code will be revised by a new programmer. meaning this will take a long time before it will get fixed as we need to addres issues with a higher priority
About Cheapaz Chips Round 1 APU AMD 3000G FM / UL verification link is required ← How can I set it up? The link between 3DMark and HWBOT has already been established, but there is no submission item to HWBOT from the result screen
Copy and paste the url from the futuremark result to the compare url on the entry form
Thank you for information understood
Hello, i'm kinda new here, been hobbying pc's and hardware since 82 last century :)... so i made a profile, and submitted some scores, also fro xtu intel. Other submitted benches went ok, the xtu, was a bit figuring it out, and imo it worked, i submitted actual benches done on my pc, yesterday or the day before. Now when logging in and checking my profile, on top it says 3 submissions reported, so appearantly i must have done something wrong, also is it not possible to set my xtu profile 'public' ... at this moment when i go and check my profiles from xtu, they are gone, at the link on top where it says 'reported (3)' there is a sheet, where appearantly i must select a 'row' but it is complete blank, and cannot select anything, also an error message is posted in the sheet. In the comments is said that there are suggestions to alter my settings, so i loaded the profile in xtu, but it where the same settings... And my profile is unaible to make public for 'use of testing material and and some more things i should be using to do those benches' ... ehm shame i could not respond immediately to whoever decided that some settings could not even be made with my setup ... this is actually kinda weird, because the benches are just done on my pc, without help of any aftermarket super hardware testing rig ... but as said i am new here on site, so i probably must have done something wrong ... day 3 on the site, and i must say i am amazed that there is actually response to my scores, harder even, they get reported, or flagged automatically ... to be honest i have not gone through the hassle of reading every rule, because there are a lot of them, as i went to look at them a bit more euh focused. My personal goal is only to compare what i make with the settings of the hardware, and compare it with scores of other enthousiasts as to say... Can someone pls point me in a direction as maybe who to contact about the reported submissions. Because this community is for a third time visitor quite huge with a wide range of interest. So i understand there must be rules, not even arguing about that ... but being told i use special hardware and/or getting reported as such... So can someone pls enlighten me a little bit, i have no intentions what so ever to alter tests in my advantage being it with modded hardware or dodgy software, for the reason that i absolutely see no point in fooling myself. And for openers it would be nice if someone could just tell me what went wrong to begin with ;) ... Thanks in advance for taking your time reading this to begin with ... ;) peace out
Welcome, any questions you want to ask about rules feel free to make a thread with what you'd like to know. Not so bad once you get the hang of it. Don't take offense to reported submissions we all get them.
Edit: you will need screen shot with info in picture I posted red boxes mandatory.
If you have any speciific question you can contact me, Bilko or Georgestorm.
Anyway quick update on the site for you: subbing for other benchmarks via the XTU profile will be disabled in the future: it gives not accurate info and user tend to forget HWBot requires a verification screenshot in 99% of the cases ( like Splave showed you )
Before you go into benching or comparing scores with other users always check out the rules at the frontpage. Click on Benchmarks, choose CPU, GPU or memory benchmarks, select the rules of the benchmark you want to run...
Hey hello, thanks for the replies, ;) was not offended, here to learn, and probably maybe even an automated reaction on one of the settings, so no offence taken at all, if my rig gets seen as 'engineering hardware' how can i even be offended ;) ... thanks
Oh and forgot to mention, it was not about other benchmarks through the xtu profile, but the xtu benchmark it self, every time ...
XTU competitive usage at HWBOT has been stopped a while ago due to the fact it is far from stable, newer versions gave way higher output messing up the rankings and last but not least it still can be seriously bugged in output (intentionally or not).
Look at this score for instance:
https://hwbot.org/submission/4385444_autolochus_xtu_core_i9_9900kf_39631_marks
Lately we here that people are running into hardware detection problems (stating they have ES hardware), the output datafile is sometimes no longer compatible with HWBot, ...
HWBot has a new owner and once the paperwork is completed we will discus if this bench still has a future here.
Thanks for the info, learning on the go ;)
And indeed the xtu score is quite impressive, way to big gap to 3rd place...Or must be damn lucky regarding the processor bought
its just a bugged score, one of the reasons we don't use it anymore, these scores are everywhere , totally out of whack. Alsothey released a newer version which boosted scores over 20% , totally shredding up the existing ranking... no no no
Ow ... the plot thickens ;) ... last question, since i now understand why the reporting was done, next to reported there is (4) do i need to do anything about this 4 submissions ?? Or is it just an 'reported' counter ? Guess this gets more interesting every day .... when the benchmarks get programmed to outrun tests on their predecessors ... must be getting complicated then, so you convinced me leeghoofd, its not empty at all :D thanks for giving some text about the whats and whatnots ;)
got "An error accurred while trying to upload the profile" ????
what profile are you referring too ?
Can you please fix the error on the "Reported" page. Seems to have been there for a while. https://community.hwbot.org/topic/194025-reported-tool-not-working/
It's already in the to do list for the new programmer
I asked for a status update of how the progress is, keep you posted
Hello, I have accidentally submitted a score of 3d mark 11 entry level 2 times, 1st i typed score 15.923 as meaning fifteen thousand, but see afterwards is taken for 15,923 (bit less than 16 (not thousand))... so i submitted the score 15923 a second time, only then found out the original was able to be edited ... Idk if it is needed, but i could not personally remove one ... And please, where again is the desktop background picture for download, for i taken a picture from old bench, and moved all cpu-z and -g over the old ones (that where screenshot) ... thanks in advance and appologies for the inconvenience ... grtzzzz ps leeghoofd ... you are legend :o
Ok, found it ... shouted to soon ;) could be removed on the profile page ...
that's just the link to your profile, I deleted the double one already, bench on!
Hello. I have an issue - every time I try to search for a CPU or find it through Hardware Library, there is an error message 504 Gateway Time-out. Tried from different ISPs and browsers but with no success. This is happening for about a week now. Could you please tell me is the problem on my side or not? Thank you.
Hwbot server problem at Amazon... Only thing that helps is too refresh a few times than it will pop up
Veuillez vous identifier ou enregister pour commenter