Submission Details
Gomeler`s wPrime - 32m Ergebnis - Extreme League
24sec 586ms mit AMD Sempron 145 at 5964MHz
Ranglisten Position
15381st
WR Rang:
15381st von 20979
33rd
Globaler 1x CPU Rang:
33rd von 2889
27th
Sempron 145 Rang:
27th von 190
Points earned for overclocker league
-
Weltrekord Punkte (UWP)
15381st
-
Globale Punkte (UGP)
33rd mit 1 CPU
-
Hardware Punkte (UHP)
27th mit Sempron 145
36.9 Punkte
Points earned for team league
-
Globale Team Power Punkte (GTPP) 21st im Team verwendet 1 CPU
78.4 Punkte
-
Hardware Team Power Punkte (HTPP) 20th Im Team verwendet Sempron 145
11.2 Punkte
Hardware Details
CPU Details
- Model: AMD Sempron 145 'Sargas' (1 Kerne aktiv)
- Kühlung: Liquid Nitrogen
- Cores: 5.964Mhz(+113.00%)
VGA Details
- Geschwindigkeit: Mhz / Mhz (Bestand)
Mainboard Details
- Hersteller: GIGABYTE
- Model: GA-MA790X-UD4P
- Kühlung: Air (Stock)
- Chipsatz: 790X
-
Neueste Kommentare
Gomeler Kommentierte sein eigenes Ergebnis:
Only one of my Dominator PC2-8888C4 sticks is working =( Will have to try again in dual channel.
BeepBeep2 sagt:
That's a heck of a CPU right there, can't believe you to got the HTT up there so high. I remember hitting a wall around 330.
Gomeler sagt:
On air this CPU walled around 360HTT. Under LN2 I was able to hit around 445HTT but the CPU was only stable through wPrime 32M at a maximum speed of around 6050MHz. I still need to test again in dual channel as I fear I am losing some efficiency in running single channel.
BeepBeep2 sagt:
As far as I remember memory doesn't play much role in wprime, if I were you I'd try to drop the CPUNB down to about 2000-3000 and also drop it's voltage to see if you can gain CPU frequency. Dual Channel will be faster but it likely won't be much.
TaPaKaH sagt:
I don't know exact behavior with Corsair SPD, but max HTT is usually better if you flash your mems with SPD from some TeamGroup or Crucial modules
single/dual channel doesn't have any affect on efficency, you're losing more because of Vista - try WinXP with Luna theme with VGA drivers
Gomeler sagt:
Thanks for the tips Sam. I wasn't HTT walled, more like the core was walled regardless of volts at around 6050MHz. I'll be retrying after CES with two sticks of D9GMH and a proper XP installation. I didn't use XP as I happened to have Windows Vista installed on that drive and decided to give it a go
Bitte einloggen oder register to comment.