Like this
Submission details
Tsunamijuan's
CPU Frequency score
- Overclockers League
5900.5 mhz with A8-3870K at 5900.5MHz
Ranking position
n/a
Global rank:
n/a
A8-3870K rank:
Points earned
-
Global Points (UGP) Not Tsunamijuan’s best submission.
0.0 points
-
Hardware Points (UHP) Not Tsunamijuan’s best A8-3870K submission.
0.0 points
-
Global Team Power Points (GTPP) Not Overclockers.com’s best submission.
0.0 points
-
Hardware Team Power Points (HTPP) Not Overclockers.com’s best A8-3870K submission.
0.0 points
Media gallery
- Screenshots
-
- GA-A75-UD4H
-
- Verification URL, image, checksum
- http://valid.canardpc.com/show_oc.php?id=2210007
Hardware details
CPU details
- Model: A8-3870K 'Llano'
- Cooling: Liquid Nitrogen
- Speed: 3,000 @ 5,900.5MHz
Memory details
- Product: Dominator GTX6
- Cooling: Liquid Nitrogen
- Type: 4096MB DDR3 SDRAM
- Clockspeed: @ 699MHz
- Timings: 9-9-9-24
VGA details
- Model: Radeon HD 6550D (BeaverCreek)
- Cooling: Liquid Nitrogen
Mainboard details
- Manufacturer: GIGABYTE
- Model: GA-A75-UD4H
- Cooling: Standard Stock Cooling
- Chipset: A75
-
Recent Comments
Brought to you by Vasoline, Ln2, and 2.3volts of vcore :D
lol! Nice work Juan!
damn! well done
this llanos surely love volts! congrats
Thanks guys, this was tons of fun :D
Only 5.9 GHz ?
hehe good for me :D
ran out of ln2 or i would of proably gotten a bit more out of it.
How was the boil off at those volts Juan?
On bulldozer, boil off seems the same as deneb/thuban at less than 1.8v or so. Above that and boil off at idle is similar to deneb/thuban under load.
Curious if you notice a big difference at 2.3v compared to 1.8 or less on the chip.
excellent cpu cooler on the south lol.
those rams are iced up..crazy
It could be a little more extreme at times, you could tell when it froze or was getting close to freezing due to how rapid the boil would get. Otherwise the chip is generally so low powered that its just sipping ln2 most of the time. Only time you really really notice these chip heat up is when you get a 4core + apu load, At that point the temperature and watt load swing quite quickly, from the 130ish-170ish watts to around 350-400ish watts under extremely high clocks.
Hey, nice score!
One question: I can't see any voltmod on your board or am I offically blind now? How do you get above 1.8 vcore? Thanks in advance!
Ok, I got it. Easy Tune 6 has a slider that goes beyond 1.8 volts. Let's test it. :)
Please log in or register to comment.