Submission Details
Stelaras`s 3DMark2001 SE Ergebnis - Extreme League
17307 marks mit NVIDIA GeForce 3 Ti500 at 380/600MHz
Ranglisten Position
n.a.
Globaler 1x GPU Rang:
1st
GeForce 3 Ti500 Rang:
1st von 27
Points earned for overclocker league
-
Globale Punkte (UGP)
Not Stelaras's best submission
0.0 Punkte
-
Hardware Punkte (UHP)
1st mit GeForce 3 Ti500
35.0 Punkte
Points earned for team league
-
Globale Team Power Punkte (GTPP) Not Hellas Overclocking Team's best submission
0.0 Punkte
-
Hardware Team Power Punkte (HTPP) 1st Im Team verwendet GeForce 3 Ti500
9.2 Punkte
Hardware Details
CPU Details
- Model: Intel Pentium E6500K 'Wolfdale-2M'
- Kühlung: Air (Custom)
- Cores: 3.920Mhz(+33.65%)
-
Arbeitsspeicher Details
VGA Details
- Model: GeForce 3 Ti500 (NV20) NVIDIA
- Kühlung: Liquid Nitrogen
- Geschwindigkeit: 380Mhz (+58.33%) / 600Mhz (+140.00%)
Neueste Kommentare
Stelaras Kommentierte sein eigenes Ergebnis:
Dedicated to my friend Massman ! :D
Massman sagt:
WHOAH!!!!!!!!
I.nfraR.ed sagt:
Impressive. These cards really need an external power.
Mine could do 340, but not in all tests, so I gave up.
No time for zombie, because I need to make the "e-power" first
Don_Dan sagt:
Great score!
Also good to see those red Cellshock in action!
Stelaras sagt:
Thanks guys .
I love modding and "discovering mods" .
I tried 3 cards but i couldn't find one with 600+ memories . Is it so hard ?
I.nfraR.ed sagt:
Yes, out of 5 different models GF3's I have only one that does above 600.
Maybe a specific chips to look for, but I don't have enough knowledge about these cards.
Speaking about gpus though, mine could run 330-340 nature on LN2, but other tests were limited to 290-ish. Any higher and the screen goes into "color blocks on black screen" mode.
Stelaras sagt:
I used around 1.8V . How high did you go with yours ?
I.nfraR.ed sagt:
1.7-1.75, higher was making it worse, but with epower it could handle 1.8+ I think.
Stelaras sagt:
No , because my card was able to get up to 1.85V . Higher and it was losing clocks . I tried up to 1.95V . It's not a power hungry card ... Not at all .
I just used epower because i sometimes find it much easier & faster to install , than modding the card in regular ways (trimmers etc) . Especially when you don't know what you're going to find (like protections for example)
I.nfraR.ed sagt:
Well, might be it just needs some more caps or to replace the existing ones, but I had that thing on 3 cards.
And I remember the same was happening on GT3 when benched 3DM03: http://hwbot.org/submission/2310105_i.nfrar.ed_3dmark03_geforce_3_2134_marks
And 40MHz is a really big difference, maybe your card is just that great or I'm missing something.
Did you try another card on cold?
All I have tried on air usually get into the 270-280 range.
Looking at the charts, only poparamiro managed 290 out of it and it's a non-reference design. It even has a power connector. Maybe that's the card to look for.
Stelaras sagt:
I only had two cards . The 2nd one was around 10Mhz worse in memories aircooled.
I only froze one card (the best of two) . Max air clocks around 270 , like yours (but unmodded)
I.nfraR.ed sagt:
Not sure what is the max without mods, I had it modded from some of the previous competitions.
I think it was 272 without mods and 284 with mods
Maybe I should try older drivers, that might be the problem.
Bitte einloggen oder register to comment.