Like thisSubmission Details
gioy86`s 7-Zip Ergebnis
- Enthusiast League
60641 MIPS mit Intel Core i3 12100F 
at 5666MHz
Ranglisten Position
3212th
WR Rang:
3212th von 4943
29th
Globaler 4x CPU Rang:
29th von 700
15th
Core i3 12100F Rang:
15th von 71
Points earned for overclocker league
-
Weltrekord Punkte (UWP)
3212th
-
Globale Punkte (UGP)
29th mit 4 CPU
67.0 Punkte
-
Hardware Punkte (UHP)
15th mit Core i3 12100F
27.0 Punkte
Points earned for team league
-
Globale Team Power Punkte (GTPP) Not Team Spartan's best submission
0.0 Punkte
-
Hardware Team Power Punkte (HTPP) 12th Im Team verwendet Core i3 12100F
4.3 Punkte
Hardware Details
CPU Details
- Model: Intel Core i3 12100F 'Alder Lake-S'
-
Kühlung:
AIO Water
- Temperatur (°C): 87 Last
- P-Cores: 5.666Mhz
-
-
Arbeitsspeicher Details
- Manufacturer: G.SKILL
- Produkt: Trident Z5
- Kühlung: Air (Stock)
- Typ: 32768MB DDR5 SDRAM
- Geschwindigkeit: @ 3.455Mhz
- Timings: CL32.0 42-42-42 2T
-
VGA Details
- Model: AMD Radeon RX 480 (Ellesmere) AMD
- Kühlung: Air (Stock)
- Geschwindigkeit: 1.120Mhz / 2.000Mhz (Bestand)
-
Mainboard Details
- Model: Z690 Aqua OC
- Kühlung: Air (Stock)
- Chipsatz: Z690
Neueste Kommentare
how are you cooling 1.61v with an AIO and only getting 87°C ? I was already hitting 78°c with 1.51v(set) on my 12100 using custom loop with triple D5 pump and 4°c water.
Cpu-z read 1,61v, but in bios and via atuning tool i set 1,55volt. My board has a big difference from real vcore and read vcore. I bench only with aio (bequiet pureloop 360), and in past with a noctua.
CPU-Z voltage is usually always off. I've asked the same question before. Ryzen 8000 series is even worse. Benchmate shows 2.55+ V, but CPU-Z will show close to actual values. Dont trust anyones voltages unless its a HWInfo Screen.
Bitte einloggen oder register to comment.