leeghoofd dit :

11 year and 11 months ago –

Ow yeah baby, makes my 11K run blush

zeneffect dit :

11 year and 11 months ago –

well done!

Massman dit :

11 year and 11 months ago –

Dammit, Zeneffect! Your comment makes me think you've got something way better up your sleeve

zeneffect dit :

11 year and 11 months ago –

nah, nothing yet. not enough ln2 to go full pot for a run... still trying to figure out why im walling the igp at 1750ish.

 

bios only allows +.350v to igp, dunno if thats normal across all manufacturers as i dont have an asus or msi board... but your CPU score is a piece of cake to beat. i rock that @ 5.8 w/ HT

 

'twas a genuine "well done!"

Massman dit :

11 year and 11 months ago –

Gigabyte is limited to +350mV (which is too little), the Gene has a higher voltage range. Not sure about the MSI board.

zeneffect dit :

11 year and 11 months ago –

thats what i figured since it would just simply cut out. where is Dino when you need him lol! man id hate to have to buy a gene for 1 day of benching. id much rather have a formula or extreme but cant afford till after comp

 

*edit*

 

looked at an email i sent. mentioned where i was walling and the need for more voltage. hopefully giga will deliver the goods on time?

leeghoofd dit :

11 year and 11 months ago –

was already requested a long time ago... +350 ain't cutting it... and there's more to the Giga then just the iGP voltages...

zeneffect dit :

11 year and 11 months ago –

yes i know. im just responding to what is relevant to igp 06 right now. though im not having nearly as many memory problems as others.

Massman dit :

11 year and 11 months ago –

Did you experience any OCP-like shutdown behavior on the GBT board too?

zeneffect dit :

11 year and 11 months ago –

ocp like shutdown when pushing the igp.

ocp like shutdown with CPU @ 6ghz+ with HT.

 

I raised current limits to max values in the cpu features page and it seemed to help pass cpu test. did nothing for igp as there were no settings available.

 

what giga board are you referring to? i need to do some further testing once i refill to see if its the same across all the boards i have here.

Massman dit :

11 year and 11 months ago –

You should play with the PWM settings - I'm not getting OCP shutdowns on the CPU side when pushing the frequency. Not sure if the IGP OCP is working correctly, though, as even with tuned settings I was still getting shutdowns past +250mV and 1750MHz IGP

zeneffect dit :

11 year and 11 months ago –

i will play with a better cpu, pwm frequency settings netted no gain vs auto

 

that one was not so good. 2670 tops on imc, 6.3ghz max 1.8v.

Gamer dit :

11 year and 11 months ago –

You always seem to surprise me, great score!

Massman dit :

11 year and 11 months ago –

Thank you Mister Team Captain!

Freakezoit dit :

11 year and 11 months ago –

Good work Peter *Thumbs up*

 

Maybe i should also push my IGP

 

@ Zeneffect , u should try Intel XTU for IGP (IGP voltage (as far as i know + 1.500v max) ,multi , Current limit override etc.)

zeneffect dit :

11 year and 11 months ago –

Good work Peter *Thumbs up*

 

Maybe i should also push my IGP

 

@ Zeneffect , u should try Intel XTU for IGP (IGP voltage (as far as i know + 1.500v max) ,multi , Current limit override etc.)

 

tried that already. it makes the board shut down even faster.

Massman dit :

11 year and 11 months ago –

Tbh, it's a pity the board shuts down so fast. Seems like the Gigabyte is actually quite a bit more efficient than the Gene :-/

zeneffect dit :

11 year and 11 months ago –

well, it looks like i dont have enough time for a re-bench for this stage. Congrats to you, that is one killer score you put up .

leeghoofd dit :

11 year and 11 months ago –

We tested with UD3H and wild guessing the new P board has the same limits... hence why PJ benched on my ASUS board.

zeneffect dit :

11 year and 11 months ago –

pretty good "wild guess" because it does.

Robot dit :

11 year and 11 months ago –

@ Zeneffect , u should try Intel XTU for IGP (IGP voltage (as far as i know + 1.500v max) ,multi , Current limit override etc.)

 

 

i could not get pass 1700 MHZ with the Gigabyte-Board so I did this and that was the last run for my 3770K

 

you have to be very careful with XTU.