Submission Details
Le score de Pablocs08 sur 3DMark 99 Max - Extreme League
2982 marks avec S3 ProSavageDDR à 133/133MHz
Position dans le classement
n/a
Global 1x GPU classement:
4th
ProSavageDDR classement:
4th sur un total de 7
Points earned for overclocker league
-
Points Global (UGP)
Not Pablocs08's best submission
-
Points Hardware (UHP)
4th utilisant ProSavageDDR
Points earned for team league
-
Points Global Team Power (GTPP) Not Argentina New Generation OC Team's best submission
0.0 Points
-
Points Hardware Team Power (HTPP) 4th en équipe utilisant ProSavageDDR
2.4 Points
Détails matériel
Détails Processeur
- Modèle: Intel Pentium 4 2.8Ghz (Prescott, 133 FSB) 'Prescott-1M'
- Refroidissement: Air (Stock)
- Cores: 3 163MHz(+12.96%)
-
Détails mémoire
- Manufacturer: CORSAIR
- Produit: XMS
- Type: DDR SD-RAM
- Fréquence: @ 150MHz
- Chronomètres CL2.0 2-2-5
Détails carte graphique
- Modèle: ProSavageDDR (8D04) S3
- Fréquence: 133MHz (+9.92%) / 133MHz (+∞%)
Détails carte mère
- Fabricant: ASUS
- Modèle: P4VP-MX
- Chipset: P4M266 (VT8751)
-
Commentaires récents
hubip dit :
Hi! Can I ask, how did you managed to overclock this mobo?
dit :
@hibip, please, read this guide how to determine your's clock generator with pll (phase-lock-loop) device:
http://www.cpufsb.de/FSB.HTM
If you'll know what model is , you can use more "modern" programs for example SetFSB:
http://www13.plala.or.jp/setfsb/
or CPUFSB:http://www.cpufsb.de/
Photos available on google search are not good enough to determine the exact model, so you should to look straight on your motherboard and write down the chip name. Hope it'll help you
hubip dit :
Hi LUDEK. Actually I tried the CPUFSB, but with wrong IC number. In reality I didn't pay attention to read carefully the site, just as check the mobo for the right IC. So after your post I checked again everything, and you had right, now it's working !!!
I pushed a celeron D 330 to 3.1Ghz. 60°C is the load temperature, so I don't think I can go much further as the intel ark says 67°C Tcase for this cpu.
At the end, you helped me a lot so THANK YOU!!!
Veuillez vous identifier ou enregister pour commenter