Submission Details
I.nfraR.ed`s SuperPi - 1M Ergebnis - Extreme League
29sec 703ms mit AMD Athlon XP-M 2500+ (Barton) at 3581MHz
Ranglisten Position
n.a.
Globale Rangliste
1st
Athlon XP-M 2500+ (Barton) Rang:
1st von 49
Points earned for overclocker league
-
Globale Punkte (UGP)
Not I.nfraR.ed's best submission
-
Hardware Punkte (UHP)
1st mit Athlon XP-M 2500+ (Barton)
35.0 Punkte
Points earned for team league
-
Globale Team Power Punkte (GTPP) Not XTREME OC Team Bulgaria 's best submission
0.0 Punkte
-
Hardware Team Power Punkte (HTPP) 1st Im Team verwendet Athlon XP-M 2500+ (Barton)
14.2 Punkte
Hardware Details
CPU Details
- Model: AMD Athlon XP-M 2500+ (Barton) 'Barton'
- Kühlung: Liquid Nitrogen
- Cores: 3.581Mhz(+91.91%)
Arbeitsspeicher Details
- Manufacturer: Mushkin
- Produkt: Level II Black
- Kühlung: Air (Custom)
- Typ: 512MB DDR SD-RAM
- Geschwindigkeit: @ 256Mhz
- Batch: BH-5
- Timings: 2-2-2-5 1T
VGA Details
- Model: GeForce4 MX 4000 64-bit (NV18) NVIDIA
- Kühlung: Air (Stock)
- Geschwindigkeit: 250Mhz / 200Mhz (Bestand)
Mainboard Details
- Hersteller: Abit
- Model: NF7-S V2.0
- Kühlung: Air (Custom)
- Chipsatz: nForce2 Ultra 400
-
Neueste Kommentare
ruggero sagt:
...It's a incredible frequency
Do you have tested on air this cpu?
NoMS sagt:
This is the first ever sub-30s PI 1M on Athlon XP or I miss something?
pcwerman sagt:
You're right ! This is world first sub 30 sec.I think he is wizard...
Mr.Scott sagt:
Way to go Ivan. :celebration:
I.nfraR.ed sagt:
Ruggero, I've tested it on water only. 2900+ 1M with vcore < 2V. Valid 3000+.
Bong313 sagt:
WOW.....29 sec
ruggero sagt:
Ok,thank's and again congratulation for the score.
robbo2 sagt:
Epic!
Massman sagt:
Whoah ... just whoah!!
BeepBeep2 sagt:
Wow!
d0minat0r sagt:
Amazing results and cup
Moose83 sagt:
Mother of AMD, you guys totally nailed it
boblemagnifique sagt:
Monster Frequency !! IQYHA FTW ^^
Maggehagge sagt:
Did you forgot that nForce 2 chipset always works best with x-x-x-11 timings? both stability and performance IIRC. or maybe superPI is faster with 2-2-2-5 instead of 2-2-2-11?
I.nfraR.ed sagt:
No, I haven't forgot, but 2-2-2-5 is faster than 2-2-2-11 on my board/bios.
Mr.Scott sagt:
Mine generally are also.
TerraRaptor sagt:
what was chipset voltage like?
I.nfraR.ed sagt:
Nothing special - 1.85V or so. Don't remember exactly, but this particular board does not scale past 2V on the chipset.
TerraRaptor sagt:
Okay, thanks. I need >2.3v to go 240fsb 2-2-2 on A7n8x-e deluxe (2.0v - no go, only 230mhz 2-2-2) - it works fine in 1M but cannot complete 32m (dunno if this is overheating, missing 5V caps (desoldered them to mod different mobo) or memory - should check this today). My old result was commented by myself that I had used 2.48v vdd to go 250 2-2-2 and I'm not sure if this is clever/safe thing (I use stock radiator on NB).
I.nfraR.ed sagt:
Try with higher volts on the 3.3V rail. Modded bios is also very important, but I guess you're using one, since you're able to do 250MHz. You can also try L12 hardware mod.
I haven't yet killed NF2 chipset with voltage, but if you're not cooling it fine, these volts won't help you.
Generally speaking, my boards does not scale good with NB voltage. I have only one board that likes high volts and another one that can't complete 32M at 250MHz with more than 1.6V on the NB
I've also had NF7 that can't do more than 250MHz for benches no matter volts/bios/cpu.
TerraRaptor sagt:
Thank you Ivan. I have resoldered caps, changed nb TIM and went to 3.7v - now everything is stable @252 2-2-2 but one of my winbond sticks suck - now i need to get my 2*256mb and 2*512mb winbonds sets back from friend and I'll be able to enter socket A competition.
d3mox sagt:
Can you tell me how to mod 3.3v rail?
I.nfraR.ed sagt:
There are plenty of PSU modding guides over the net, you can check x-bit's guide or get a PSU with adjustable rails.
TerraRaptor, I've never went up to 3.7V.
TerraRaptor sagt:
D3mox I had a standalone psu with 3.3v mod - just because overvolted 3.3 rail is not that good for other setups. It is also important to have a psu that is able to provide as much power as possible @3.3+5.0v rails (i.e. my current coolermaster 800w has 150w which leads to shutdowns of a7n8x @2ghz barton aircooled, my old huntkey was rated 180w and so was better).
GraduS sagt:
Very result! When I finish with s370 I try socketA too.
Bitte einloggen oder register to comment.