Submission Details
Eisbaer798的CPU Frequency成绩 - 极限联盟
5745.38 MHz 和 Intel Core 2 Quad Q9650 在 5745.4MHz
排名位置
n/a
全球排名
1st
Core 2 Quad Q9650 排名:
Points earned for overclocker league
-
全球分数(UGP)
Not Eisbaer798's best submission
0.0 积分
-
硬件分数(UHP)
1st 使用 Core 2 Quad Q9650
62.0 积分
Points earned for team league
-
全球战队能量分 (GTPP) Not Team Hardware-Reaktor-Reloaded's best submission
0.0 积分
-
硬件战队能量分(HTPP) 1st 战队使用Core 2 Quad Q9650
43.1 积分
硬件细节
CPU细节
- 型号: Intel Core 2 Quad Q9650 'Yorkfield-12M'
- 散热: Cascade Phase Change
- 温度: -79 (负载)-84 (空载)25 (环境温度)
- 批号
- Cores: 5,745.38MHz(+91.51%)
-
内存细节
- Manufacturer: CORSAIR
- 类别 DDR3 SDRAM
显卡细节
- 速度:: MHz / MHz ()
主板细节
- 厂商: GIGABYTE
- 型号: GA-EP45T-UD3P
- 散热: Water (Custom)
- 芯片组: P45
-
硬盘细节
电源细节
- 厂商: Sapphire
- 系列: PurePSU
- 电源: 1,250瓦
近期的评论
Eisbaer798 评价他自己的分数:
1,70v Vcore / LLC on / 1,52v VTT / 1,50v PLL / 1,64v NB This happened after a couple failed posts the board only posts with 2 cores enabled; this allows much higher FSB then usual. I suspect one of the dies failed post, thus the CPU is running as a dual core only :-O I'm still in the process of reproducing the error. Hope to be able to provide more information about it soon.. For more information see ==>https://www.youtube.com/channel/UCaVdtJ8VIV-Mndi2T0iQPbQ
ground 说:
Insane :O
gtxx58 说:
Just Awesome!
Don_Dan 说:
Nice one, Kai!
Eisbaer798 说:
Thanks guys! Totally insane I'm still shocked
Noxinite 说:
I've had that once before, but I think I had it happen on a REX and I could never reproduce. Sweet score though!
MaddMutt 说:
^ I saw your other sub from the same board. Is this a problem -> quad core only works as a dual <- with the CPU’s or the board? IIRC these are 2 dual core CPU’s acting as a quad core. Can you set which 2 cores work in the bios? IIRC they use the FSB to communicate -> If set to high it is causing corruption in the data between dies? Next WR = SP 1m and 32m scores.
Eisbaer798 说:
I still cant't undestand the error. It just happens random. I can't say whether it's due to the voltage being set too high or something else. It happens with one Quad CPU and not with the next. In the case of the Q9650 result, the board itself raised the boot FSB from 535 to 638MHz. Don't ask me why...I don't think there will be new SP1M or 32M records. I was just able to validate the high CPU clock before the system said goodbye with a blue screen. Further attempts with an FSB of 600 set in bios were unsuccessful. So I Think both dual-core chiplets are active if you set an FSB of 600 in the bios.
And no, unfortunately you can't turn off CPU cores with a GB board. That only work with the rex which is again x48.
说:
Cant remember how this popped up.
1. older bios
2. only kentsfield
Eisbaer798 说:
Unfortunately, this option is missing in my bios.
Have you any info what bios can it be?
说:
Just one Bios Version older than the last Version.
Antinomy 说:
Checked both F8c and F7 versions for EP45T-UD3P with Modbin, the menu is there. Try ctrl+F1 in main BIOS setup screen.
Eisbaer798 说:
Thanks Antinomy I'll try that next week. It would be great if that would work!
Eisbaer798 说:
Ok guys, I`ve now tried something around. With Yorkfield CPUs (Q9650/Q9550 etc) the option does not appear in the Bios when pressing ctrl+F1. With Kentfield CPUs (Q6700/Q6600) the option appears in the Bios, but it does NOT disable any cores. With socket 771 dual core server CPUs (like Xeon 5150) the Bios option appears and cores can also switched off!
请登录或注册后才能评论