- HWBOT OC Challenge March 2012: "Goodbye Abit, RIP" - Socket A Reference Clock
- 1 likes
- Weltrekorde
- Rankings
-
Like this
Submission Details
ivanov`s Reference Frequency Ergebnis
- Extreme League
284.74 MHz mit Abit NF7 V2.0 
at 284.7MHz
Ranglisten Position
n.a.
Globale Rangliste
3rd
NF7 V2.0 Rang:
3rd von 22
Points earned for overclocker league
-
Globale Punkte (UGP)
Not ivanov's best submission
-
Hardware Punkte (UHP)
3rd mit NF7 V2.0
7.0 Punkte
Points earned for team league
-
Globale Team Power Punkte (GTPP) Not Overclock.pl Team's best submission
0.0 Punkte
-
Hardware Team Power Punkte (HTPP) 3rd Im Team verwendet NF7 V2.0
4.9 Punkte
Mediengallerie
- Bildschirmphoto
-
-
- Verifikations URL, Bilder, Checksumme
- http://valid.canardpc.com/show_oc.php?id=2312975
Hardware Details
CPU Details
- Model: AMD Athlon XP-M 2400+ (Barton) 'Barton'
- Kühlung: Air (Custom)
- Cores: 1.708,49Mhz(-5.08%)
-
Arbeitsspeicher Details
- Manufacturer: Patriot
- Produkt: XBLK
- Kühlung: Air (Custom)
- Typ: 512MB DDR SD-RAM
- Geschwindigkeit: @ 285Mhz
- Timings: 3-4-4-8
VGA Details
Mainboard Details
- Hersteller: Abit
- Model: NF7 V2.0
-
Kühlung:
Liquid Nitrogen
- Chipsatz: nForce2 Ultra 400
-
Festplatten Details
Netzteil Details
- Hersteller: Tagan
- Netzteil: 430 Watt
Neueste Kommentare
Achieved with red_baron. Chipset had fancy 2.56V :-) Everything was barely stable. Sometimes we had something like on the third photo. W tried 2.65V on NB, but MB didn't want to cooperate :-(
Congrats! Very nice
I went up to 2.35V on water, but FSB didn't go up. Had no time to get LN2 this week.
Thanks :-) And the funny thing is, that there was something wrong with the VDIMM mod. Over 3.2V MB didn't boot
We had to resign from Winbond BH-5. But Samsung TCCD on 2.8V did the job pretty well :-)
On this board vtt (v-ref for nb-mem signals) depends on memory voltage. On my one the best settings are 3,15v v-mem and 1,95 v-nb.
I'm waiting for new cpu from my friend but i'm afraid that it's to late
You probably missed the Vtt/Vref mod and the result was that Vtt didn't follow VDIMM/2 ratio. At 3.2V on the ram it had been stuck @ 1.45V.
I have this mod and I know that there has to be VDIMM/2 ratio. Board just didn't cooperate over 3.2V
I have no clue why. Will investigate soon.
I dont really consider it as a disadvantage. vtt/v-mem dependance helped me to reach 282mhz
Bitte einloggen oder register to comment.