Submission Details
ivanov的Reference Frequency成绩
- 极限联盟
284.74 MHz 和 Abit NF7 V2.0 
在 284.7MHz
排名位置
n/a
全球排名
3rd
NF7 V2.0 排名:
Points earned for overclocker league
-
全球分数(UGP)
Not ivanov's best submission
-
硬件分数(UHP)
3rd 使用 NF7 V2.0
7.0 积分
Points earned for team league
-
全球战队能量分 (GTPP) Not Overclock.pl Team's best submission
0.0 积分
-
硬件战队能量分(HTPP) 3rd 战队使用NF7 V2.0
4.9 积分
硬件细节
CPU细节
- 型号： AMD Athlon XP-M 2400+ (Barton) 'Barton'
- 散热: Air (Custom)
- Cores: 1,708.49MHz(-5.08%)
-
内存细节
- Manufacturer: Patriot
- 产品: XBLK
- 散热: Air (Custom)
- 类别 512MB DDR SD-RAM
- 速度：: @ 285MHz
- 计时： 3-4-4-8
主板细节
- 厂商: Abit
- 型号： NF7 V2.0
-
散热:
Liquid Nitrogen
- 芯片组： nForce2 Ultra 400
-
硬盘细节
电源细节
- 厂商: Tagan
- 电源: 430瓦
近期的评论
Achieved with red_baron. Chipset had fancy 2.56V :-) Everything was barely stable. Sometimes we had something like on the third photo. W tried 2.65V on NB, but MB didn't want to cooperate :-(
Congrats! Very nice
I went up to 2.35V on water, but FSB didn't go up. Had no time to get LN2 this week.
Thanks :-) And the funny thing is, that there was something wrong with the VDIMM mod. Over 3.2V MB didn't boot
We had to resign from Winbond BH-5. But Samsung TCCD on 2.8V did the job pretty well :-)
On this board vtt (v-ref for nb-mem signals) depends on memory voltage. On my one the best settings are 3,15v v-mem and 1,95 v-nb.
I'm waiting for new cpu from my friend but i'm afraid that it's to late
You probably missed the Vtt/Vref mod and the result was that Vtt didn't follow VDIMM/2 ratio. At 3.2V on the ram it had been stuck @ 1.45V.
I have this mod and I know that there has to be VDIMM/2 ratio. Board just didn't cooperate over 3.2V
I have no clue why. Will investigate soon.
I dont really consider it as a disadvantage. vtt/v-mem dependance helped me to reach 282mhz
请登录或注册后才能评论