Submission Details
leeghoofd`s XTU Ergebnis - Elite League
1372 marks mit Intel Core i7 4770K at 5655.6MHz
Ranglisten Position
n.a.
Globaler 4x CPU Rang:
90th
Core i7 4770K Rang:
90th von 5720
Points earned for overclocker league
- leeghoofd hat sich entschieden Punkte für dieses Ergebnis zu deaktivieren.
Points earned for team league
Mediengallerie
- BIOS/UEFI Einstellungen Analysiere Teilen XTU Einstellungen XTU Hardware
Hardware Details
CPU Details
- Model: Intel Core i7 4770K 'Haswell-DT'
- Kühlung: Liquid Nitrogen
- Cores: 5.655,64Mhz(+61.59%)(ref/imc/qpi: 101//Mhz)
-
Arbeitsspeicher Details
- Produkt: PLATINUM
- Typ: DDR3 SDRAM
VGA Details
- Geschwindigkeit: Mhz / Mhz (Bestand)
Mainboard Details
- Chipsatz: Z87
Neueste Kommentare
leeghoofd Kommentierte sein eigenes Ergebnis:
Retesting 5ghz 1.385 Vcore CPU, no go over 6ghz 1core, 4/8 seems acceptable, CB at -115°C Not tweaked for performance (as usual)
Farjam sagt:
it was a 5ghz 4c8t 1.385v?
leeghoofd sagt:
yep, boots at 1.385 into win7 4/8 and runs 1M, AIDA CPU Queen, PhotoworXX on air.
Same CPU runs 4600 1.23Vcore AIDA stress test stable.
Re-testing the other one tonite... wished it could do 6100 1 core and 5800 all cores, but nope...
None optimised runs with the Corsair 2800C11 CFR kit... +1400 should be doable at them CPU speeds...
der8auer sagt:
Which batch is this one?
Farjam sagt:
so voltage on air is not always an important sign , my 6280mhz 01 chip was 4c8t 1.385 only for xp... but not bad with ln2... and i had an 6200 chip for 3Ds and 6050 for 06 that could not boot even 4.8 below 1.4v on air. and some 5ghz 1.41v that can not pass 06 @ 5700
der8auer sagt:
I think you still need low voltage on air but it has to scale on cold and high voltage.
My first 4670K did 1,15V 4500 MHz primestable which was a very good one. 6,3 GHz max valid and 6,1 for 32m.
I had a 4770K which did 4500 MHz at 1,175 Volt which is just a little bit worse but it did not scale on cold at all. 5,9 GHz max on LN2...
But the L313B996 ones which only did 4300 MHz at 1,275 V primestable were 5,5 to 5,6 max valid on LN2.
leeghoofd sagt:
Batch is L316B432 sr nr: 35310047A1952
This chip needs high uncore/NB, eg setting it at 50X would shutdown the setup at +5800Mhz, with 52X it was far more stable...
looking for better
Farjam sagt:
you looking for some chips like this? ...
http://www.8pic.ir/images/81643667854035628361.jpg
1.088 for cinebench
leeghoofd sagt:
just want a bulletrpoof retail +6Ghz bencher for 3D 4/4... my quest continues...
der8auer sagt:
And then you end up with a CB at -90°C and a max clock of 5,8 haha
Farjam sagt:
nope only only only on this one i was not so bad luck cb is -116 and 3Ds 6350-6400 and 6540 pifast, i buy cpus from one same batch to make sure about not a very bad cb
Dinos22 sagt:
scatter benching as usual
leeghoofd sagt:
What did you expect dino
Vivi sagt:
interesting cache behaviour there albrecht, i have found my chip shut down earlier than normal sessions, so ill try mess with cache a little
nfszocker sagt:
5.65GHz/1200MHz and 1370m of score, is no good efficiency;)
leeghoofd sagt:
No tweaks applied to the rams as mentioned in the comment this is done on a daily OS too... just testing a CPU...
Bitte einloggen oder register to comment.